Specifications

Connection Configuration 109
Table 16-1 Terminal Emulation and Terminal Type
Terminal Emulation Terminal Type
Select Emulation:
VT52, VT100, VT400 7-Bit (default),
or VT400 8-Bit
Then select from VT TerminalID:
vt100, vt101, vt102, vt125, vt220,
vt240, vt320, vt340, vt420 (default),
vt131,orvt132
Select Emulation:
ANSI BBS, SCO Console, WY50,
WY50+, TVI910, TVI920, TVI925,
TVI955, ADDS A2, HZ1500,orWY60
The function is deactivated.
Select Emulation:
IBM3151
Then select from IBM3151 Model:
11 (default), 31
Select Emulation:
IBM3270
1. Then select from IBM 3270 Model:
3278-2, 3278-3, 3278-4, 3278-5,
3278-2-E (default), 3278-3-E,
3278-4-E, 3278-5-E, 3279-2, 3279-3,
3279-4, 3279-5,or3287-1
2. Check the Right Ctrl Acts as
Enter Key or the Left Ctrl Acts as
Reset Key check boxes if you want
these functions enabled for 3270
emulation.
Select Emulation:
IBM5250
1. Select from IBM 5250 Model:
5291-1, 5292-2, 5251-11, 3179-2
(default), 3196-A1, 3180-2,
3477-FC, 3477-FG, 3486-BA,
3487-HA, 3487-HC, or 3812-1
2. Check the IBM5250 Monochrome,
Left Ctrl Acts as Reset Key, Right
Ctrl Acts as Enter Key,orthe
Carriage Return acts as Enter
Key check boxes if you want these
functions enabled for 5250
emulation.