Specifications

92 Connection Configuration
Call Options
Click on the Call Options tabtoinvoketheCall Options properties sheet.
Figure 12-3 Call Options Properties Sheet
The following table discusses the functions of this properties sheet.
Table 12-3 Call Options Properties Sheet
Function Description
Call Setup Use this group box to configure the following call
parameters:
Cancel the Call if Not Connected Within
1. Enter in this field the number of seconds to wait
before a call is canceled. The default is 120 with the
function enabled.
2. Click the check box to enable the function.
Wait for Dial Tone Before Dialing
Click on the check box to enable the function. By
default this function is enabled.
Wait for Credit Card Tone
Enterinthefieldtheperiod(inseconds)oftimetowait.
The default is 0.
Extra Settings Use this field for special modem commands. See
“Modem AT Commands” in Getting Help for more
details.