HP LaserJet Pro M11-M13 Getting Started Guide

2
Windows full solution
1. Insert the printer CD into the computer, or launch the software
installation le downloaded from the web.
2. Follow the on-screen instructions. When prompted to select a connection
type, select the appropriate option:
• Congure to print over the Wireless Network
• Congure to print using USB
CAUTION: Do not connect the USB cable until prompted by the
installation program.
• Connect to a congured Wireless Network Printer
For wireless models only
3. When the installation is complete, print a conguration page to make sure
that the printer has a SSID name. (Press and hold the Cancel
button until
the ready light blinks, and then release it to print a conguration page).
4. When installation is complete, disconnect the USB cable.To print from a
phone or tablet, connect the device to the same wireless network as the
printer.
Windows basic installation
1. Turn on the printer.
2. Disconnect the USB cable from the printer and the computer (if it is
already connected). If the printer is connected to the network, leave it
connected.
3. Go to www.hp.com/support/ljm11-m13.
4. Select a printer or category from the list, then click Drivers, and then
download the installation software for the printer.
OS X full solution
1. Launch the software installation .dmg le downloaded from the web.
2. The software installer detects the language of the operating system, and
then it displays the main menu of the installation program in the same
language.
3. The Installation Options screen details the software to be installed. Click
the Install button.
4. Follow the on-screen instructions to install the software.
5. At the end of the software installation process, use the HP Utility Setup
Assistant to congure printer options.
OS X basic installation
To install basic print drivers without running the HP full solution software from
the CD or hp.com download, follow these steps:
1. Connect the printer to the computer or network.
2. From System Preferences, and click Printers and Scanners.
3. Click the plus [+] button on the bottom left, and select M11-M13 using
the driver named HP Printer.
7. Install the software
Install from the printer CD
For Windows, the software installation les are provided on the CD that came with
the printer.
For OS X, the installer le on the CD includes a DMG le.
Install notes
For more details about the software for the printer, see the install notes le on the
printer CD.
Download from the web
1. Go to www.hp.com/support/ljm11-m13.
2. Under Download options, click Drivers, Software & Firmware, and then select
the appropriate operating system.
3. Click Download.
4. Follow the on-screen instructions.
5. Continue with “7. Install the software”.
NOTE: HP Easy Start can also be downloaded by doing the following:
1. Go to 123.hp.com
2. Select the printer model, and then click Begin.
3. Launch the software le from the folder where the le was saved, and continue
with “7. Install the software”.
6. Locate or download the software installation les
Connect the device to the wireless network
To print from a phone or tablet, connect the device to the same wireless
network as the printer.
Newer Android devices (4.4 or newer) Open the item to print, and select the
Menu button. Select Print, select the printer, and select Print.
Some devices require downloading the HP Print Service plugin app from the
Google Play store.
Older Android Devices (4.3 or older) Download the HP ePrint app from the
Google Play store.
Windows Phone Download the HP AiO Remote app from the Windows Store.
Learn more about mobile printing
To learn more about other mobile printing options,
including additional ePrint solutions, scan the QR code,
or see the “Mobile printing” section of the user guide.
8. Mobile and wireless printing (optional)
HP Wireless Direct (M12w)
HP Wireless Direct allows Wi-Fi capable devices, such as smart phones,
tablets, or computers, to make wireless network connection directly to the
printer without using a wireless router or access point. Connect to the printer’s
HPwireless direct signal the same way Wi-Fi capable devices are connected to
a new wireless network or hotspot.
Enable HP Wireless Direct
Enable HP Web Services in the HP Embedded Web Server (EWS) by following
these steps:
1. Connect the printer to a network, and print a conguration page to get the
printer IP address.
NOTE: To set the IP address manually or congure it automatically, see
“Congure the network product” in the user guide.
2. Open a web browser, and enter the printer IP address into the address line.
Example IP address: 192.168.0.1
8.1 8.2