Installation Manual

Mounting File Systems Automatically 29
Storage Management
Mounting File Systems Automatically
To mount file systems automatically at startup, add them to the /etc/vfstab file. For
example, to add slice c1t17d0s0, enter it into the vfstab file.
• Device to mount: /dev/dsk/c1t17d0s0
• Device to fsck: /dev/rdsk/c1t17d0s0
• Mount point: /SAN/fibre1
• fstype: UFS
• fsck pass: 1
The following example shows a vfstab file:
#device device mount FS fsck mount mount
#to mount to fsck point type pass at boot options
#
#/dev/dsk/c1d0s2 /dev/rdsk/c1d0s2 /usr ufs 1 yes -
fd - /dev/fd fd - no -
/proc - /proc proc - no -
/dev/dsk/c0t0d0s4 - - swap - no -
/dev/dsk/c0t0d0s0 /dev/rdsk/c0t0d0s0 / ufs 1 no -
/dev/dsk/c0t0d0s6 /dev/rdsk/c0t0d0s6 /usr ufs 1 no -
/dev/dsk/c0t0d0s3 /dev/rdsk/c0t0d0s3 /var ufs 1 no -
/dev/dsk/c0t0d0s7 /dev/rdsk/c0t0d0s7 /export/home ufs 2 yes -
/dev/dsk/c0t0d0s5 /dev/rdsk/c0t0d0s5 /opt ufs 2 yes -
/dev/dsk/c0t0d0s1 /dev/rdsk/c0t0d0s1 /usr/openwin ufs 2 yes -
swap - /tmp tmpfs - yes -
# SAN Manager Devices
/dev/dsk/c1t17d0s0 /dev/rdsk/c1t17d0s0 /SAN/fibre1 ufs 1 yes -