Installation Manual

26 Creating a UFS File System
Creating a UFS File System
Now that your disks are partitioned, create a UFS file system on each partition.
1. At the # prompt, enter ls /dev/rdsk/c1* and press Return.
In this example, c1 is the Fibre Channel controller. Solaris lists all of the enabled
physical and virtual LUNs on the Fibre Channel controller. For each device, all 8 slices
are listed, regardless of whether they contain partitions.
# ls /dev/rdsk/c1*
/dev/rdsk/c1t127d135s0 /dev/rdsk/c1t127d20s0 /dev/rdsk/c1t127d35s0
/dev/rdsk/c1t127d135s1 /dev/rdsk/c1t127d20s1 /dev/rdsk/c1t127d35s1
/dev/rdsk/c1t127d135s2 /dev/rdsk/c1t127d20s2 /dev/rdsk/c1t127d35s2
/dev/rdsk/c1t127d135s3 /dev/rdsk/c1t127d20s3 /dev/rdsk/c1t127d35s3
/dev/rdsk/c1t127d135s4 /dev/rdsk/c1t127d20s4 /dev/rdsk/c1t127d35s4
/dev/rdsk/c1t127d135s5 /dev/rdsk/c1t127d20s5 /dev/rdsk/c1t127d35s5
/dev/rdsk/c1t127d135s6 /dev/rdsk/c1t127d20s6 /dev/rdsk/c1t127d35s6
/dev/rdsk/c1t127d135s7 /dev/rdsk/c1t127d20s7 /dev/rdsk/c1t127d35s7
/dev/rdsk/c1t127d189s0 /dev/rdsk/c1t127d250s0 /dev/rdsk/c1t17d0s0
/dev/rdsk/c1t127d189s1 /dev/rdsk/c1t127d250s1 /dev/rdsk/c1t17d0s1
/dev/rdsk/c1t127d189s2 /dev/rdsk/c1t127d250s2 /dev/rdsk/c1t17d0s2
/dev/rdsk/c1t127d189s3 /dev/rdsk/c1t127d250s3 /dev/rdsk/c1t17d0s3
/dev/rdsk/c1t127d189s4 /dev/rdsk/c1t127d250s4 /dev/rdsk/c1t17d0s4
/dev/rdsk/c1t127d189s5 /dev/rdsk/c1t127d250s5 /dev/rdsk/c1t17d0s5
/dev/rdsk/c1t127d189s6 /dev/rdsk/c1t127d250s6 /dev/rdsk/c1t17d0s6
/dev/rdsk/c1t127d189s7 /dev/rdsk/c1t127d250s7 /dev/rdsk/c1t17d0s7