Installation Manual

Preparing a Fibre Channel Disk for use with SAN Manager LM 25
Storage Management
14. At the Ready to label disk, continue? prompt, enter y and press Return.
At this point, the new partition table is written to the disk. If you view this disk’s Device
Information in the SAN Manager LM administration application on a SAN Manager LM
Windows NT node, the device will be listed with a Sun partition map.
15. At the partition prompt, enter q and press Return.
16. To partition another disk, choose disk from the format menu, press Return, and repeat
steps 2 through 15, above.
17. When all disks are partitioned, exit the Format menu.