User's Guide

60)&0DQDJHU'LUHFWRU\,QIRUPDWLRQ
5HVRXUFH9DULDEOHV
7DEOH )&0DQDJH U5H VRXUF H9DULDEOHV
Variable Function
FCMEnabled Specifies whether or not FC Manager should be running on the
management server. Default: Enabled
FCMDaemonSleep Specifies in seconds the interval of time between each probe of the
fcmanD daemon. Default: 10; Minimum: 3; Maximum 60
FCMDaemonProgram Specifies the name of the FC Manager daemon. Default: fcmanD
FCMURLCGIProg1 Specifies the name of the FC Manager CGI Script. Default: fcman1
FCMURLCGIProg2 Specifies the name of the FC Manager CGI Script. Default: fcman2
FCMURLCGIProg3 Specifies the name of the FC Manager CGI Script. Default: fcman3
FCMUserID Specifies the user name for running the FC Manager daemon. This
name must be identical to the name used to run the web server.
Default: root
FCMStandalone Specifies whether FC Manager is the only cgi-bin application on the
web server. Default: Enabled
FCMRetry Specifies the number of times the daemon attempts to poll the
managed device. If no response is received after the specified
number of retries, an error is logged. Default: 3; Minimum: 0;
Maximum: 3
FCMTimeout Specifies how many milliseconds the daemon waits to receive a
response from the managed device. Default: 500; Minimum: 100;
Maximum: 600
FCMWebServerPort Specifies the port number where the web server resides. This must be
identical to the port number used to run the web server. Default: 80
FCMBridgeManagerEnable Specifies whether bridge management is enabled. Default: Disabled
FCMBridgeServletPort Specifies on which port the bridge servlet resides. Default: 8080