- Hewlett-Packard Computer Drive User Manual
Table Of Contents
- Internal Drives—Installation Overview
- Contents
- Product Details
- Installing an “i” Model Drive (internal)
- Before You Start: Check the Contents of the Box
- Before You Start: Check System Prerequisites
- Step 1: Check the Drive’s SCSI ID
- Step 2: Set the Configuration Switches (UNIX Systems Only)
- Step 3: Prepare the Mounting Bay
- Step 4: Attach Mounting Rails
- Step 5: Install the Drive
- Step 6: Attach Power and SCSI Cables
- Step 7: Secure the Drive
- On Completion
- Installation Troubleshooting
HP SureStore DAT
Installation Guide
1-15
Figure 1.8 Attaching the HP NetServer E-series, Vectra, Kayak or Brio rails to the tape drive
Figure 1.9 Attaching Compaq rails to the tape drive
Use the four
screws
provided with
the rail kit
Use the four
screws
provided with
the rail kit
Dat-int.bk Page 15 Wednesday, May 26, 1999 10:46 AM