- Hewlett-Packard Computer Drive User Manual
Table Of Contents
- Internal Drives—Installation Overview
- Contents
- Product Details
- Installing an “i” Model Drive (internal)
- Before You Start: Check the Contents of the Box
- Before You Start: Check System Prerequisites
- Step 1: Check the Drive’s SCSI ID
- Step 2: Set the Configuration Switches (UNIX Systems Only)
- Step 3: Prepare the Mounting Bay
- Step 4: Attach Mounting Rails
- Step 5: Install the Drive
- Step 6: Attach Power and SCSI Cables
- Step 7: Secure the Drive
- On Completion
- Installation Troubleshooting
HP SureStore DAT
Installation Guide
1-8
Figure 1.2 SCSI ID settings on back of HP SureStore DAT40i
Installing and Using HP TapeAssure
HP TapeAssure allows you to check your computer’s current SCSI
configuration on a Windows or NetWare system. You cannot install HP
TapeAssure on Unix systems.
Installing HP TapeAssure
1 Select home.htm on the HP SureStore Tape CD-ROM and the required
language.
2 Select the “HP TapeAssure” topic and follow the instructions on the screen
to install HP TapeAssure.
In Windows 95/98 or Windows NT, you can install HP TapeAssure directly
on the system to which the tape drive is connected. In NetWare, you will
need to install HP TapeAssure on the server from a client workstation
running Windows 95/98 or Windows NT, and then run HP TapeAssure from
the NetWare server console.
Example
SCSI IDs
9
3
5
13
(Default)
2
Dat-int.bk Page 8 Wednesday, May 26, 1999 10:46 AM