Instruction Manual
Table Of Contents
- G2 Backup System user guide
- Contents
- 1 Getting started
- 2 Home, Summary
- 3 Virtual Tape Devices
- 4 NAS
- 5 Appliance Configuration
- 6 Status
- 7 Replication
- 8 Administration
- 9 Restore processes with replication
- 10 Restore processes without replication
- 11 Understanding LEDs
- 12 Hardware monitoring
- 13 Troubleshooting
- Connecting to the StoreOnce Backup System from the backup application
- Connecting to the network
- Using the 10Gb ports (HP D2D4300 Series only)
- Performance
- Web Management Interface errors and warnings
- Power On/Off Problems
- Cannot connect to Web Management Interface
- NFS State handle error
- Cannot authenticate an iSCSI session
- Diagnostic Fibre Channel device
- If the HP StoreOnce Backup System runs out of disk space
- Cannot access a storage shelf (HP D2D4100 and 4300 Series Backup Systems)
- If backup or replication fails
- Recovering Devices that have ‘failed to start’ or have become read-only
- StoreOnce Backup System configuration problems
- Upgrade licenses
- Replacement of hardware
- Upgrades to component parts
- 14 Hard disk replacement
- A Extra information for G1 products
- Glossary
- About this guide
- Index
2 Home, Summary
Summary (Home)
Whenever you log in, the Summary page is displayed. It is also accessed from Home in the
navigation bar.
Use this page:
• To display information about your HP StoreOnce Backup System and its network connection.
• To find out whether you have a G1 or G2 product (in the Type field). This is important when
upgrading software.
• To monitor system health and status.
The following example shows the Summary page for an HP D2D4312 Backup System.
NOTE: If a capacity upgrade kit has been installed, the shelves are also shown on the Summary
page. (HP D2D2500 Series products do not support connection of a Capacity Upgrade Kit.)
Table 1 Summary page layout
Select the appropriate option from the top bar.Navigation bar1
The Help option opens the help pages. This is a context sensitive link that displays
help that is appropriate to the currently selected page. Logout closes your session
Help and logout2
on the HP StoreOnce Backup System. If somebody else logs in, you will be
automatically logged out.
This section provides the information that identifies your HP StoreOnce Backup
System. It shows the Type (Product Generation), Name, Serial Number and Software
Revision of the HP StoreOnce Backup System. .
The Up Time records how long the HP StoreOnce Backup System has been running.
StoreOnce Backup System
information
3
8 Home, Summary