Instruction Manual

ManualsBrandsHP ManualsStorageStoreOnce Backup

151

152

153

154

155

156

157

158

159

160

Table Of Contents

G2 Backup System user guide
Contents
1 Getting started
- Introduction
- What is the Web Management interface?
- To run the Web Management Interface
- Initial logon and Welcome message
2 Home, Summary
- Summary (Home)
3 Virtual Tape Devices
- Devices (Virtual Tape Devices)
- Making Replication Target libraries visible to the host
- Cartridges (Virtual Tape Devices)
4 NAS
- Shares (NAS)
- Configuring NAS targets for CIFS
- Configuring users on AD (CIFS shares only)
- Configuring NAS shares for NFS
5 Appliance Configuration
- Network (Configuration)
- Fibre Channel (Configuration)
- iSCSI (Configuration)
- SNMP (Configuration)
  - HP Systems Insight Manager
- Email Alerts (Configuration)
  - To configure Microsoft Exchange Server
6 Status
- System Activity (Status)
- Storage (Status)
- Disk (Status)
- RAID (Status)
- Network (Status)
- iSCSI (Status)
- Fibre Channel (Status)
- Storage Reporting (Status)
- Log (Status)
7 Replication
- Status (Replication)
- Virtual Tape Mappings (Replication)
  - Running the replication wizard (virtual tape devices)
- NAS Mappings (Replication)
  - Running the replication wizard (NAS)
- Partner Appliances (Replication)
  - Source Appliance Permissions tab
- Local Appliance (Replication)
- Event History (Replication)
8 Administration
- User Account (Administration)
- Security (Administration)
- Date & Time (Administration)
- Housekeeping (Administration)
- Shutdown (Administration)
- Software (Administration)
- Support (Administration)
- Backup & Restore (Administration)
- License (Administration)
9 Restore processes with replication
- Recovering a Source Appliance (Virtual Tape devices)
- Recovering a Source Appliance (NAS shares)
10 Restore processes without replication
- Restore scenarios
- Restoring single files
- Restore and deduplication
- Reconnecting to the to iSCSI VTL devices after host failure
11 Understanding LEDs
- HP D2D4324/4312 Backup System
- HP D2D4112/4106 Backup System
- HP D2D2502/2504 Backup System
- Hot-plug drive LEDs
- Fibre Channel card LEDs
- Capacity upgrade kit LEDs
12 Hardware monitoring
- Resolving problems
13 Troubleshooting
- Connecting to the StoreOnce Backup System from the backup application
- Connecting to the network
- Using the 10Gb ports (HP D2D4300 Series only)
- Performance
- Web Management Interface errors and warnings
- Power On/Off Problems
- Cannot connect to Web Management Interface
- NFS State handle error
- Cannot authenticate an iSCSI session
- Diagnostic Fibre Channel device
- If the HP StoreOnce Backup System runs out of disk space
- Cannot access a storage shelf (HP D2D4100 and 4300 Series Backup Systems)
- If backup or replication fails
- Recovering Devices that have ‘failed to start’ or have become read-only
- StoreOnce Backup System configuration problems
- Upgrade licenses
- Replacement of hardware
- Upgrades to component parts
14 Hard disk replacement
- RAID
- How do I know a disk has failed?
- Replacing a hot-plug hard disk
- After replacing the failed disk
- If several disks fail
A Extra information for G1 products
- Overview
- Major differences
  - VTL devices
  - NAS devices
- Tape Attach
Glossary
About this guide
Index

Obtaining support

Click on the Support tab.

• The general support enquiries link takes you to HP Support web pages.

• With tape libraries a link is provided so that you can generate a support ticket from the library

GUI. This link takes you to the Command View MSL login.

Upgrading tape storage device firmware

As long as the tape device is supported, you can also upgrade the firmware from this screen. Click

on the Firmware tab.

• For tape drives you can upload firmware that you have downloaded from the HP web site.

Please refer to http://www.hp.com/support for details of the latest firmware for your HP

Ultrium Tape Library or Tape Drive and download required files to a location on your host

machine before you use this page.

• For tape libraries a link is provided so that you can use the library GUI. This link takes you to

the Command View MSL login.

NOTE: If you update firmware on an attached physical tape device that has a cartridge loaded

at the time, the cartridge will be unloaded by the firmware update.

156 Extra information for G1 products