User's Guide

The OneCommand Manager User Manual Page 56
1. Select Host view.
2. Select a OneConnect adapter in the discovery-tree.
Figure 27: iSCSI Adapter Information tab
OneConnect Adapter Information Field Definitions
• Model - The model of the selected adapter.
• Serial Number - The serial number of the selected adapter.
• Active Firmware Version - The version of the firmware running on the selected adapter.
• Firmware State - The condition of the firmware.
• BIOS Version - The version of the BIOS in use.
• HW Version - The hardware version of the selected adapter.
• NCSI Version - The Network Controller Sideband Interface version.
• IPL File Name - The name of the IPL (Initial Program Load) file currently loaded.
• PCI Express Link Speed - The speed of the PCI bus in which the adapter running.
• PCI Express Bus Width - The number of lanes for the slot in which the adapter is running.
• Adapter Temperature - If the adapter's temperature is not available, “Not Supported” is
displayed. (Not supported on VMware ESX servers being managed through the CIM interface.)
If supported by the adapter, this field displays the adapter's temperature and one of the following
temperature-related status messages:
• Normal: The adapter’s temperature is within normal operational range.