User's Guide

The OneCommand Manager User Manual Page 55
2. Select an FC adapter in the discovery-tree.
Figure 26: FC Adapter Information tab
FC Adapter Information Field Definitions
• Model - The complete model name of the adapter.
• Serial Number - The manufacturer's serial number for the selected adapter.
• Hardware Version - For LightPulse adapters it displays the JEDEC ID. For OneConnect
adapters it displays the board type and revision code.
• Device ID - The default device ID for the selected adapter. (Not supported on VMware ESX
servers being managed through the CIM interface.)
• Adapter Temperature - If the adapter's temperature is not available, “Not Supported” is
displayed. (Not supported on VMware ESX servers being managed through the CIM interface.)
If supported by the adapter, this field displays the adapter's temperature and one of the following
temperature-related status messages:
• Normal: The adapter’s temperature is within normal operational range.
• Warning: The adapter’s temperature is beyond normal operational range. If the temperature
continues to increase, the adapter shuts down. You must determine the cause of the
temperature problem and fix it immediately. Check for system cooling issues. Common
causes of system cooling issues include clogged air filters, inoperable fans and air
conditioning problems that cause high ambient air temperatures.
• Exceeds operational range - Adapter stopped: The temperature has reached critical limit,
forcing the adapter to shut down. You must determine the cause of the temperature problem
and fix it before resuming operation. Check for system cooling issues. Common causes of
system cooling issues include clogged air filters, inoperable fans and air conditioning
problems that cause high ambient air temperatures.
After the system overheating issue is resolved and the adapter has cooled down, reboot the sys-
tem or, if the system supports hot swapping, cycle the power of the adapter slot.
Viewing OneConnect Adapter Information
When you select a OneConnect adapter from the discovery-tree, the Adapter Information tab contains
general attributes associated with the selected OneConnect adapter. You can also use this tab to view
and enable licenses. See “Showing and Installing Licenses for OneConnect Adapters” on page 96 for
more information.
To view general OneConnect adapter information: