User's Guide

The OneCommand Manager User Manual Page 252
AllNodeInfo
Supported by: Windows, Solaris and Linux
Syntax:
hbacmd AllNodeInfo <WWPN>
Description: This command shows target node information for each target accessible by the adapter.
Parameters:
WWPN - Adapter’s WWPN
BindingCapabilities
Supported by: Windows and Solaris
Syntax:
hbacmd BindingCapabilities <WWPN>
Description: This command shows the binding capabilities of the adapter. If a binding is configured, it is
maintained across reboots.
Parameters:
WWPN - Adapter’s WWPN
BindingSupport
Supported by: Windows and Solaris
Syntax:
hbacmd BindingSupport <WWPN> <Source>
Description: This command shows the binding support for the adapter.
Parameters:
WWPN - Adapter’s WWPN
Source -
C = Configuration support
L = Live support
PersistentBinding
Supported by: Windows and Solaris
Syntax:
hbacmd PersistentBinding <WWPN> <Source>
Description: This command specifies which set of persistent binding information (configured or live
state) is requested.
Note: For managing ESX/ESXi hosts from a Windows client, add the m=cim option to
the command. The default CIM credentials must be set using the SetCimCred
command. See “SetCimCred” on page 250.