User's Guide

The OneCommand Manager User Manual Page 246

CnaClearEventLog

Supported by: Windows, Linux and VMware ESX

Syntax:

hbacmd CnaClearEventLog <WWPN|MAC>

Description: This command clears the CNA eventlog specified by the WWPN or MAC address.

Parameters:

WWPN - WWPN of the CNA FCoE port

MAC - MAC address of NIC or iSCSI port of the CNA

CnaGetEventLog

Supported by: Windows, Linux and VMware ESX

Syntax:

hbacmd CnaGetEventLog <WWPN|MAC>

Description: This command shows the CNA event log specified by the WWPN or MAC address.

Parameters:

WWPN: Adapter’s WWPN port

MAC - MAC address of the NIC or iSCSI port

Download

Supported by: Windows, Solaris, Linux and VMware ESX

Syntax:

hbacmd Download <WWPN|MAC> <FileName>

Description: Loads the firmware image to the FC or CNA port specified by the WWPN or MAC address.

Parameters:

WWPN - Port’s WWPN

MAC - The MAC address of the NIC or iSCSI port

FileName - The name and location of the firmware image (any file accessible to the CLI client)

Note: Supported for OneConnect adapters only.

Note: For managing ESX/ESXi hosts from a Windows client, add the m=cim option to

the command. The default CIM credentials must be set using the SetCimCred

command. See “SetCimCred” on page 250.

Note: For 16-Gb HBA firmware downloads, OneCommand Manager only accepts

.grp files.