User's Guide

The OneCommand Manager User Manual Page 243
UpdateiSNSServer
Supported by: Windows, Solaris, Linux and VMware ESX
Syntax:
hbacmd [h=host_IP[:port] | hostname[:port]] UpdateiSNSServer <MAC_Address>
<Server_IP> <Port>
Description: This command updates the configured iSNS server. This command requires the server IP
<Server_IP> and port number <Port> of the iSNS server be available to respond to the iSNS requests.
Parameters:
MAC_Address - MAC address of the CNA port
Server_IP - IP address of the iSNS server to configure
Port - Port number of the iSNS server to configure (value: 1024-65535)
LUN Masking Commands
GetLunList
Supported by: Windows and Solaris
Syntax:
hbacmd GetLunList <HBA WWPN> <Target WWPN> <Option>
Description: This command queries for the presence of any masked LUNs.
Parameters:
HBA WWPN - Adapter’s WWPN
Target WWPN - World wide port name of the target
Option -
0 = Get information from driver
1 = Get information from configuration
Note: Supported for FC/FCoE ports only.
Note: LUN masking commands are not supported by Linux.
Note: The GetLunMaskbyHBA, GetLunMaskbyTarget, RescanLuns, and SetLunMask
commands are not supported for VMware ESX and Solaris.
Note: For managing ESX/ESXi hosts from a Windows client, add the m=cim option to
the command. The default CIM credentials must be set using the SetCimCred
command. See “SetCimCred” on page 250.