User's Guide

The OneCommand Manager User Manual Page 15
4. Click Next. The Installation options window appears.
Figure 5: OCManager CLI Installation options window
5. Click Install. The Operation in Progress window appears. The Installation completed window
appears when the installation is finished.
6. Click Finish. You do not need to reboot the system.
Unattended Installation in Windows
To install the OneCommand Manager CLI application in Windows:
1. From the Emulex website, download the x64 or x86 OneCommand Manager Core Kit installation
file to your system.
2. At the command prompt, set the optional switch to /q or /q2. The kit is activated with this optional
switch. The /q switch displays some progress reports. The /q2 switch does not display progress
reports.
For example:
elxocmcore-windows-x64-5.01.00.10-4.exe /q2
In VMware ESX Server
To install the OneCommand Manager application CLI on a new system, install the specific rpm file for the
driver for your VMware version.
Prerequisites
• To manage FCoE adapters, load LPFC driver version 8.2, or later.
• To manage NIC or iSCSI adapters, load driver version 2.102.440.0, or later.
• To manage iSCSI adapters, load the iSCSI driver.
Procedures
To install the OneCommand Manager application CLI:
Note: The iSCSI driver is not supported for VMware ESX 4.0.