User's Guide

The OneCommand Manager User Manual Page 224
Dump directory:
For Windows: C:\Program Files\Emulex\Util\Dump
For Linux: /usr/sbin/ocmanager/Dump
For Solaris: /opt/ELXocm/Dump
For ESX: The dump directory set using the SetDumpDirectory command.
Parameters:
WWPN - Adapter’s WWPN
MAC - MAC address of the CNA port
<filename> - Name of the dump file to be copied from the remote hostExample:
hbacmd h=10.192.193.154 m=cim u=root p=Swamiji001 n=root/emulex getdumpfile BG-
HBANYWARE-15_10000000c97d1314_20100120-032820421.dmp
GetDumpFileNames
Supported by: Windows, Solaris, Linux and VMware ESX
Syntax:
hbacmd GetDumpFileNames <WWPN|MAC>
Or
hbacmd <h=ipAddress> GetDumpFileNames
Description: This command gets the names of the files in the remote host's dump directory.
Parameters:
WWPN - Adapter’s WWPN
MAC - MAC address of the CNA port
h - Host’s IP address
Example:
hbacmd h=10.192.193.154 m=cim u=root p=Swamiji001 n=root/emulex getdumpfilenames
GetRetentionCount
Supported by: Windows, Solaris, Linux and VMware ESX
Syntax:
hbacmd GetRetentionCount <WWPN|MAC>
Description: This command shows the maximum number of diagnostic dump files to keep.
Note: For managing ESX/ESXi hosts from a Windows client, add the m=cim option to
the command. The default CIM credentials must be set using the SetCimCred
command. See “SetCimCred” on page 250.
Note: For managing ESX/ESXi hosts from a Windows client, add the m=cim option to
the command. The default CIM credentials must be set using the SetCimCred
command. See “SetCimCred” on page 250.