User's Guide

The OneCommand Manager User Manual Page 207
GetCEEParams
Supported by: Windows, Solaris, Linux and VMware ESX
Syntax:
hbacmd GetCEEParams <WWPN>
Description: This command shows the CEE parameters.
Parameters:
WWPN - CNA’s WWPN
SetCEEParam
Supported by: Windows, Solaris, Linux and VMware ESX
Syntax:
hbacmd SetCEEParam <WWPN> <Param> <Value>
Description: This command sets or clears the Internal Host PFC flag. SetCEEParam configures one of
the CEE parameters.
Parameters:
WWPN - World Wide Port Name of the adapter
Param - Parameter name
LP21000-M and LP21002-M parameters:
Pausetype - 1 = Standard, 2 = Per Pause Priority
pfcflag - 0 = Clear, 1= Set
pfcpriority - (0-0xff)
fcoepriority - (0-7)
fcoeformat - (0 or 0x10000)
Uifporttype - 1 = Access, 2 = Trunk
Value - Parameter Value
Where multiple values are possible, they should be specified using comma separated values.