User's Guide

The OneCommand Manager User Manual Page 206
SetBootParam
Supported by: Windows, Solaris, Linux and VMware ESX
Syntax:
hbacmd SetBootParam <WWPN> <Type> <Param> <Value1> [BootDev <Value2>]
Description: This command changes the boot parameters. You can change adapter parameters and
boot device parameters for OpenBoot, x86, and UEFI boot.
• When changing adapter parameters, omit the BootDev keyword and value; otherwise, an error
is reported.
• When changing bootdevice parameters for OpenBoot, omit the BootDev keyword and value;
otherwise, an error is reported.
• For boot device parameters for X86 or UEFI, you must provide the BootDev keyword and value.
Parameters:
WWPN - Adapter’s WWPN
Type - X86, UEFI, OB
Param - Parameter name
Value1 - Parameter value
BootDev - The boot device
Value2 - Boot device entry number: (0 - 7)
CEE Commands
CEEDownload
Supported by: Windows, Solaris, Linux and VMware ESX
Syntax:
hbacmd CEEDownload <WWPN> <Filename>
Description: This command updates the CEE firmware on the adapter.
Parameters:
WWPN - Adapter’s WWPN
Filename - Name of the file to download
Note: Converged Enhanced Ethernet (CEE) commands are for CEE management of
LP21000 series adapters only.
Note: Supported for LP21000 series adapters only. Not supported for OneConnect
adapters.
Note: For managing ESX/ESXi hosts from a Windows client, add the m=cim option to
the command. The default CIM credentials must be set using the SetCimCred
command. See “SetCimCred” on page 250.