User's Guide

The OneCommand Manager User Manual Page 202
GetAuthConfig
Supported by: Windows, Solaris and Linux
Syntax:
hbacmd GetAuthConfig <WWPN1> <WWPN2>
Description: This command retrieves the authentication configuration for the adapter.
Parameters:
WWPN1 - Adapter’s WWPN
WWPN2 - Must be "ff:ff:ff:ff:ff:ff:ff:ff" for a switch or the actual WWPN for a target
GetAuthStatus
Supported by: Windows, Solaris and Linux
Syntax:
hbacmd GetAuthStatus <WWPN1> <WWPN2>
Description: This command returns the current status for the authentication connection specified by
WWPN 1 and 2 (adapter and the switch). It includes the current authentication state (connected or
failed). Currently authenticated connections specify the hash algorithm and DH group used in the
DHCHAP associated with this connection. Failed status includes the failure reason.
Parameters:
WWPN1 - Adapter’s WWPN
WWPN2 - Must be "ff:ff:ff:ff:ff:ff:ff:ff" for a switch or the the actual WWPN for a target
InitiateAuth
Supported by: Windows, Solaris and Linux
Syntax:
hbacmd InitiateAuth <WWPN1> <WWPN2>
Description: This command initiates the authentication configuration on the adapter.
Parameters:
WWPN1 - Adapter’s WWPN
WWPN2 - Must be "ff:ff:ff:ff:ff:ff:ff:ff" for a switch or the actual WWPN for a target
SetAuthConfig
Supported by: Windows, Solaris and Linux
Syntax:
hbacmd SetAuthConfig <WWPN1> <WWPN2> <PasswordType> <Password> <Parameter>
<Value>
Description: This command sets the authentication configuration for the adapter.