User's Guide

The OneCommand Manager User Manual Page 194
Commands Supported in CIM Provider 3.1
Commands Supported in CIM Provider 3.2
Commands Supported in CIM Provider 3.4.4
Commands Supported in CIM Provider 3.5
Note: In addition to the commands supported by the CIM Provider 3.0, the following
commands are supported by the CIM Provider 3.1:
Dump
GetDCBParams
GetDumpDierctory
GetDumpFile
GetDumpFileNames
GetFCFInfo
GetFipParams
GetRetentionCount
GetPGInfo
SetDCBParam
SetCnaPgBw
SetDCBPriority
SetDumpDirectory
SetFIPParam
SetRetentionCount
Note: In addition to the commands supported by the CIM Provider 3.0 and 3.1, the following
commands are supported by the CIM Provider 3.2:
ChangePersonality
InstallAdapterLicense
ShowAdapterLicenseFeatures
ShowLicenseAdapterID
ShowPersonalities
Note: In addition to the commands supported by the CIM Provider 3.0, 3.1 and 3.2,
the following command is supported by the CIM Provider 3.4.4:
SetCableNVP
Note: In addition to the commands supported by the CIM Provider 3.0, 3.1, 3.2 and
3.4.4, the following command is supported by the CIM Provider 3.5:
SetPhyPortSpeed