User's Guide

The OneCommand Manager User Manual Page 3
* Supported only by hbacmd for the VMware release of the OneCommand Manager application. Remote
management clients can perform these functions on ESX Server adapters using the OneCommand Manager
application GUI.
** Temporary (not persistent) driver parameters are supported on VMware ESX 3i Update 4 and versions of
VMware ESX 3.5 prior to Update 4.
***DHCHAP is not supported on RHEL6 and SLES11-SP1.
****Supported on OpenSolaris only.
^ vNIC is supported only on IBM virtual fabric adapters.
^^ Not supported on IA64 Windows 7 and x86/x64 Solaris 10, 11 systems
Known Issues
See the product release notes for the latest information.
Create and delete virtual ports
XXX
Run in read-only mode
XXX X*
Configure boot from SAN
XXX X*
Modify an IP port number
XXX X*
View vital product data
XXX X*
View transceiver information
XXX X*
Create SAN element reports
XXX X*
Manage adapters using CIM
X
Enable or disable FIP
XXX X*
COMSTAR support
X****
Adapter hot swapping/hot
plugging
X
Licensing
XXX X
Personality change
XXX X
Host grouping
XXX
vNIC^
XXX
Installs OneCommand Vision
Sensor
X^^ X^^ X
Emulex dual-ASIC 4 port
8Gb/sec FC adapters
XXX X
Emulex 16 Gb/s host bus
adapters
XXX X
Note: The features described in this manual depend on the driver version installed on the
adapter. Not all features may be available to you.
Table 1: Supported Features by Operating System Cross-Reference (Continued)
Feature/Task Windows Solaris Linux
VMware ESX
Server