User guide

show drive hostport
Description of Command Function
Displays information about the drive port, WWNN, topology, mode, speed, and loopID.
Command Syntax
show drive hostport
path: /show/drive/hostport
Command Parameters (Required)
None.
Command Options
None.
Example
/>show drive hostport
Drive WWNN/WWPN Topo Mode Speed LoopID
------------------ ----------------------- -------- ---- -------- ------
Drive 1 (P2 D1) 50.01.43.80.02.3b.20.01
Port 1 50.01.43.80.02.3b.20.02 NPort Soft AutoNeg 126
Port 2 50.01.43.80.02.3b.20.03 UnkPort Soft Unknown 126
Drive 2 (P2 D2) 50.01.43.80.02.3b.20.07
Port 1 50.01.43.80.02.3b.20.08 NPort Soft AutoNeg 126
Port 2 50.01.43.80.02.3b.20.09 UnkPort Soft Unknown 126
Drive 3 (P2 D3) 50.01.43.80.02.3b.20.0d
Port 1 50.01.43.80.02.3b.20.0e NPort Soft AutoNeg 126
Port 2 50.01.43.80.02.3b.20.0f UnkPort Soft Unknown 126
Drive 4 (P2 D4) 50.01.43.80.02.3b.20.13
Port 1 50.01.43.80.02.3b.20.14 NPort Soft AutoNeg 126
Port 2 50.01.43.80.02.3b.20.15 UnkPort Soft Unknown 126
Drive 5 (P3 D1) 50.01.43.80.02.3b.20.19
Port 1 50.01.43.80.02.3b.20.1a NPort Soft AutoNeg 126
Port 2 50.01.43.80.02.3b.20.1b UnkPort Soft Unknown 126
Drive 6 (P3 D2) 50.01.43.80.02.3b.20.1f
Port 1 50.01.43.80.02.3b.20.20 NPort Soft AutoNeg 126
Port 2 50.01.43.80.02.3b.20.21 UnkPort Soft Unknown 126
Command Details 245