Owner's manual

Range parameters:
• start—0-n
• length—1-n or -1 for all media.
• frame—0- maximum number of frames
• rack—1 or 2
So to retrieve all elements in one call,
aml/physicalLibrary/elements?start=0&length=-1 which is the
default if no range is specified.
To retrieve all elements belonging to partition named TEST
aml/physicalLibrary/elements?partition=TEST.
To retrieve all ie elements that contain media
aml/physicalLibrary/elements?type=ie&state=full.
Response Code 200, 401, and 500
XML Response See “URI: aml/physicalLibrary/elements” (page 85) for the XML Response
code.
URI: aml/physicalLibrary/segments
Method GET
Description Retrieve the segment resource instances.
Media Type Request: N/A
Response: application/xml and application/json
Parameters Query parameters names are partition, status, type, start, length, frame, and
rack with the following valid values:
partition—name of partition
status—owned by a partition or not
• available
• used
type—storage, ie, drive, or xie
Range parameters:
• start—0-n
• length—1-n or -1 for all media.
• frame—0- maximum number of frames
• rack—1 or 2
So to retrieve all elements in one call,
aml/physicalLibrary/segments?start=0&length=-1 which is the
default if no range is specified.
To retrieve all elements belonging to partition named LL1
aml/physicalLibrary/segments?partition=LL1.
To retrieve all ie segments aml/physicalLibrary/segments?type=ie.
Response Code 200, 401, and 500
XML Response See “URI: aml/physicalLibrary/segments” (page 86) for the XML Response
code.
42 Resource