Owner's manual

Description Modify the partition whose name is given by the URI path template “name”.
The following URI aml/partition/LL2 and XML request data will modify
the partitions, name, ampExtensionsCount, barcodeReporting, vendorId and
productId. These values are the only ones that can be modified through this
URI. The serialNumber field must be specified as this is used to lookup the
partition you want to modify.
Media Type Request: application/xml and application/json
Response: application/xml and application/json
Parameters N/A
Response Code 200, 401, 404, and 500
Method DELETE
Description Delete the partition whose name matches the name template path parameter.
Media Type Request: N/A
Response: application/xml and application/json
Parameters N/A
Response Code 200, 401, 404, and 500
XML Response See “URI: aml/partition/{name}” (page 76) for the XML Response code.
URI: aml/partition/{name}/ampExtensionsCount
Method GET
Description Retrieve the current Automated Media Pool (AMP) extensions
count for the partition whose name is provided by the URI
path template “name”.
A single string value will be returned that represents the
current configured extension count.
NOTE: The count represents the number of magazines.
Media Type Request: N/A
Response: application/xml and application/json
Parameters N/A
Response Code 200, 401,404, and 500
Example: Response Data
4
Method PUT
Description Change the partition’s AMP extensions count (segments),
the number that is requested will be added or subtracted
from the current extension count. If you want to add 5
segments to the current count, request 5. If you want to
remove 4 request -4.
This option only applies to standard partitions.
NOTE: The partition mode must change before a
connected host will see these changes. To change the
partitions mode, see “URI: aml/partition/{name}/mode”
(page 33).
Media Type Request: text/plain
URI: aml/partition/{name}/ampExtensionsCount 27