- Hewlett-Packard Cassette Player User Manual

Autoloader Operation
75SSL1016 Tape Autoloader Reference Guide
Figure 52: Menu Tree Structure
Note: For SSL1016 Ultrium 460 tape autoloaders, drive logs and drive read/write tests
must be accessed using Library & Tape Tools. L&TT is available at:
http://www.hp .com/support/tapetools .
All the functionality accessed from the scrolling menu is password-protected. Two
levels of security are built into the menu. The lower-level security is the operator
level and the higher-level security is the administrator level. There is one
password for each level.
Status Configuration Diagnostic Tests
Error Logs
Halt Test
Self Test
Health Check
Picker Test
Magazine Test
Inventory Test
Drive Read
SCSI ID Autoloader
Ethernet
Set IP
Dynamic (DHCP)
Static IP
Set Subnet Mask
Set Gateway
Set SNMP Server
Set Time Server
Time
Set Date/Time
Set Time Zone
Change Mode
Status
Random
Sequential
Seq Cycle Mode
Cleaning Tape
Auto Clean
Tape Location
Compression
Security
Security
Set Password
System Update
V
ersion
Element Status
Drive
Status
V
ersion
Ethernet
I/E Slot
Commands
Eject
Tape to Mail Slot
By Barcode
By Location
From Drive
Right Magazine
Left Magazine
Enter (Mail Slot)
To Drive
To Location
Move
Inventory
Enter Password
Log Out
Cleaning Tape
Load to Drive
Unload From Drive
Enter Cleaning Tape
Eject Cleaning Tape
Sequential Ops
Start
Resume
Stop
Home
Drive Write
Drive Read/Write
Mixed