- Hewlett-Packard Cassette Player User Manual

Installation and Configuration

45SSL1016 Tape Autoloader Reference Guide

To set the control mode:

1. On the main menu, scroll to Configuration.

Figure 22: Main menu

2. Press Enter.

3. On the Configuration submenu, scroll to Change Mode.

Figure 23: Select Change Mode

4. Press Enter.

The mode options appear. A checkmark appears after the enabled mode.

Figure 24: Mode Options

5. Do one of the following:

■ To change the control mode, scroll to the desired mode and press Enter.

A checkmark appears. Press Enter again.

■ To leave the control mode unchanged, press Escape.

6. Reboot for the new mode to take affect.

a. Press and hold the power button on the front panel until Power Off

appears on the LCD.

b. Press the power button again to power on the autoloader.

The new control mode is now in effect.

Status

Commands

 Configuration

Diagnostics

SCSI ID

Ethernet

Time

 Change Mode

Cleanin

e 

3 Random

Mixed

Sequential

Seq Cycle Mode