User's Manual

HP StorageWorks File System Extender Software user guide 97
Excerpt from the fsepool --list output
Excerpt from the fsepool --list --detail output
Checking the status of a particular media pool
To check the current status of a particular media pool, you must determine the FSE partition to which the
media pool belongs. Run the following command:
In the fsepool command output, locate the name of the owning partition and supply it as an argument to
the fsepartition command as follows:
The output of this command lists the names of all media pools that are currently assigned to the selected
partition, and their current status, as follows:
• the total and available capacity of all data volumes on media belonging to the media pool,
• the percentage of data volume usage,
Pool Family Type Partition BlkSize[KB] #Vol VSize[MB] SysVol SysVol[MB]
my_LTO LTO regular partLTO 128 1 n/a none n/a
my_Disk disk regular partLTO 64 1 100 none n/a
Pool: my_LTO
UUID: c8898640-8f8a-44aa-a6fd-47687ac1f791
Family: LTO
Type: regular
Partition: partLTO
PartUUID:
BlkSize[KB]: 128
#Vol: 1
VSize[MB]: n/a
SysVol: none
SysVol[MB]: n/a
Key: 1
Pool: my_Disk
UUID: f264a661-1076-41dc-baab-bae7aed9e15b
Family: disk
Type: regular
Partition: partLTO
PartUUID:
BlkSize[KB]: 128
#Vol: 1
VSize[MB]: 100
SysVol: none
SysVol[MB]: n/a
Key: 2
fsepool --list [--detail]
fsepartition --status PartitionName