User's Manual

HP StorageWorks File System Extender Software user guide 69
Windows specific
Phase 2: configuring FSE media pools
For detailed information on creating a specific media pool type, see ”Configuring a media pool” on
page 92.
Using the FSE command-line interface, you configure an FSE media pool as follows:
1. On the consolidated FSE system or the FSE server, locate the directory with the FSE configuration
templates.
Linux specific
On the Linux platform, the full pathname of the directory with FSE configuration templates is
/opt/fse/newconfig.
Windows specific
On the Windows platform, the full pathname of the directory with FSE configuration templates is
%InstallPath%\newconfig. The value of %InstallPath% depends on the choice made in the
FSE installation process. It defaults to C:\Program Files\Hewlett-Packard\FSE.
2. Make a local copy of the FSE media pool configuration template. The template is named
fse-pool.cfg.
3. Edit the local copy of the FSE media pool configuration file template and configure the appropriate
parameter values. Verify that all parameters match the characteristics of your media.
For an FSE media pool consisting of tape media, you need to configure the following parameters in its
configuration file:
• Name
DriveIndex = "1"
Capabilities = (WORM)
Host "fse_server.company.com"
{
ControlDevice = "/dev/sg6"
}
[FSE Drive]
[Date = "2005/04/11 17:40:00"]
[User = "[e-mail]"]
Name = "LTO WORM 01"
Library = "ESL9000-LTO"
MediaFamily = LTO
DriveIndex = "1"
Capabilities = (WORM)
Host "fse_server.company.com"
{
ControlDevice = "id:1:0:3:0"
}