User's Manual

HP StorageWorks File System Extender Software user guide 27
Configuring the logging level
Both the FSE Management Console server and the FSE Management Console client can be configured to
log their activities to log files. A specific path and filename can be defined using the corresponding
configuration file parameters or they can be specified in the appropriate command line options.
Logging is done according to the specified debug level, which is encoded by two parameters: -dLevel
and -DObject
CFG_FILE Specifies the location for the FSE implementation services configuration file.
Linux specific
On Linux platform, the default full pathname of the file is
/etc/opt/fse/services.cfg.
Windows specific
On Windows platform, the default full pathname of the file is
%InstallPath%\etc\services.cfg.
DEBUG_LEVEL Specifies the logging level information for the FSE Management Console
server (for details, see ”
Configuring the logging level” on page 27). The
setting can be overridden by specifying the corresponding command line
option when starting the FSE Management Console server.
The default value is d1 -DAll.
OMNIORB_CONFIG Specifies the location of the omniORB.cfg file.
The usage of the omniORB.cfg file is required on each host with:
• more than one active network adapter.
• private network communication as the means for data transfer in the FSE
implementation.
For details on how to configure the omniORB.cfg file, see chapter
”
Configuring FSE”.
This option does not have default value.
Linux specific
Default location of the omniORB.cfg file is the directory /etc/opt/fse.
Template of the omniORB.cfg file resides in the directory
/opt/fse/newconfig.
Windows specific
Default location of the omniORB.cfg file is the directory
%InstallPath%\etc. Template of the omniORB.cfg file resides in the
directory %InstallPath%\newconfig.
Location of the omniORB.cfg file can also be specified with the
OMNIORB_CONFIG environment variable. You must set the variable before
starting the FSE Management Console server or FSE Management Console
client.
ORB_ARGS Specifies the command line parameters that are passed to the omniORB
binary.
The default value is -ORBendPoint giop:tcp::4055.
Parameter Description
# Argument for debug level after the option -d can be either integer or literal:
0 | No - no trace information (default value)
1 | Err - only errors
2 | Wrn - errors and warnings
3 | Inf - errors, warnings, and trace