User's Manual

202 Monitoring and maintaining FSE
The following table lists and explains the configurable parameters:
# Default is 1 minute.
Slot = 1
[SNMP]
# ===============================================================================
# This section describes the settings for the SNMP-features of the LogAnalyzer
# ===============================================================================
# --- DestinationIP ---
# The IP-Address of the management unit.
#
DestinationIP =
# CommunityName
# The community name of the machine.
#
CommunityName = public
# --- SenderOID ---
# The SNMP O(bject)ID(entifier) of a device or a customer.
# NOTE: Choose one of the following or adapt to your needs!
# FSE
SenderOID = 1.3.6.1.4.1.18945.1.1.0
Parameter Description
SleepTime Waiting time between the analysis cycles (in seconds)
Debug Debug mode:
0 = debug mode off (default)
1 = debug mode on
RulesFile Full pathname of the file containing the analysis rules
TmpDir Full pathname of the directory used for saving temporary Log Analyzer files
(default: system temporary directory).
Make sure that this directory exists before Log Analyzer is started.
ActivityLog Full pathname of the Log Analyzer log file
AnalysisFile Full pathname of the log file to be analyzed