User's Manual

HP StorageWorks File System Extender Software user guide 117
Checking the status of media
Run fsemedium --list [--detail] to get information on media status for all media configured in
the FSE implementation. As shown in the example that follows, the output is the following:
• the medium barcode (Barcode),
• the medium type (Type),
• the name of the FSE media pool the medium belongs to (Pool),
• the current medium status (Status),
• the current physical location of the medium (Location),
• the number of all medium volumes (data volumes and system volumes) (#Vol),
• the system volume index according to its location on the medium (SysVolNo).
If you use the --detail option, fsemedium formats its output in a different way and displays the
following additional media attributes:
• the name of the FSE library in which the medium is located (LibName),
• the address of the slot in which the medium is located (SlotAddr),
• the type of slot in which the medium is located (SlotType),
• the name of the FSE drive in which the medium is loaded (DrvName),
• the serial number of the medium (SerialNo),
• the medium block size (BlockSize),
• the size of the system volume (SysVolSize),
• the UUID of the currently used medium volume (CurVol),
• the RMDB entry key of the medium (Key).