Installation Manual

HP StorageWorks File System Extender Software installation guide for Linux 75

Determining the installed hot fix

To determine which FSE hot fix is installed on the system, proceed as follows:

1. At the command prompt, invoke the following command:

The command will display an output similar to the following:

From the above example, the following information can be identified:

• On the local system, the FSE hot fix 02 is installed.

• The installed hot fix is based on the FSE release version.

• The build number of the installed hot fix is 142.

Uninstalling a hot fix

FSE hot fixes are uninstalled in the same way as FSE release software.

For details on installing FSE release software, see chapter ”Uninstalling FSE software”.

# fsesystem --version

File System Extender

fsesystem 3.3.0.142 "Release Hotfix_02"

libhsmui 3.3.0.142 "Release Hotfix_02"

libhsmparser 3.3.0.142 "Release Hotfix_02"

libhsmipc 3.3.0.142 "Release Hotfix_02"

libhsmcmn 3.3.0.142 "Release Hotfix_02"