Installation Manual

HP StorageWorks File System Extender Software installation guide for Linux 63
7 Uninstalling FSE software
If you want to remove the FSE software from a system that is part of your FSE implementation, you need to
uninstall all FSE components.
NOTE: In a distributed FSE system the sequence of uninstalling from different hosts that are part of the FSE
system matters. If external FSE clients are part of your FSE system, you need to uninstall the FSE software
from the external clients before uninstalling the consolidated FSE system or FSE server.
During FSE uninstallation, you can uninstall only the FSE Management Console components or you can
completely remove the FSE software from a particular system. In the latter case, if the FSE Management
Console components are installed on a system that also hosts basic FSE software, you must uninstall them
before uninstalling basic FSE software.
Uninstalling FSE software
NOTE: You must be logged on to the system as root in order to execute shell commands.
Uninstalling the FSE Management Console
To uninstall the FSE Management Console server or client, proceed as follows:
1. Stop the FSE Management Console server or client process. For details, see FSE user guide, chapter
”Configuring, starting, and stopping the FSE Management Console”.
2. Remove the FSE Management Console server or client package.
• To remove the FSE Management Console server package, run the command:
• To remove the FSE Management Console client package, run the command:
Uninstalling basic FSE software
Prerequisite
If there is the FSE Management Console server or client installed on the local system, you must uninstall it
as described in ”Uninstalling the FSE Management Console” on page 63.
To remove the FSE software, proceed as follows:
1. If the HSM Health Monitor daemon is running on the local system, invoke the following command to
stop it:
2. If the Log Analyzer daemons are running, depending on the event log file that you are monitoring,
invoke the following commands to stop the Log Analyzer daemons:
3. Stop the FSE processes using the fse --stop command. The command and its output is show below:
# rpm -e fse-gui-server
# rpm -e fse-gui-client
# hhm stop
# loganalyzer stop
# loganalyzer_messages stop
# fse --stop
Unmounting HSM File Systems: [ OK ]
Stopping HSM FS Event Manager: [ OK ]