Installation Manual

36 Installing FSE software
The following table lists the three types of FSE implementation and the FSE packages required for each
component, as well as the dependencies between the packages. The dependencies define the correct
order in which the packages must be installed.
Installation procedure
You need to change the current directory to the one with installation packages, and install all packages
with a single rpm command invocation. The packages must be specified in the order as defined in Table 7
on page 36:
For example, to install a consolidated FSE system, use the following command line:
NOTE: The rpm command checks for dependencies between the packages and may reorder them for the
installation process.
Monitoring the installation
While installing the FSE installation packages, the rpm command reports the installation progress and
generates an output similar to the following example.
Table 7 Installation packages
FSE installation package Depends on
package(s)
FSE
client
FSE
server
Consolidated
FSE system
1. fse-common-Version.Distr.Plat.rpm
1
1. In actual filenames of FSE packages, Version is replaced with actual version numbers in the form of
Major.Minor.SMRNumber.Build, Distr is replaced with sles9 (in the packages for SUSE Linux Enterprise Server 9) or
rhel4 (in the packages for Red Hat Enterprise Linux 4), and Plat is replaced with i586 (in the packages for SUSE Linux
Enterprise Server 9) or i386 (in the packages for Red Hat Enterprise Linux 4).
 
2. fse-server-Version.Distr.Plat.rpm common

3. fse-agent-Version.Distr.Plat.rpm common

4. fse-client-Version.Distr.Plat.rpm common

5. fse-util-Version.Distr.Plat.rpm common
 
6. fse-cli-admin-Version.Distr.Plat.rpm common, server

7. fse-cli-user-Version.Distr.Plat.rpm common, client

# rpm -ivh FSEInstallationPackage...
# rpm -ivh fse-common-3.4.0* fse-server-3.4.0* fse-agent-3.4.0* \
fse-client-3.4.0* fse-util-3.4.0* fse-cli-admin-3.4.0* \
fse-cli-user-3.4.0*
Preparing... ########################################### [100%]
1:fse-common ########################################### [14%]
Setting FSE backup configuration file: [ OK ]
Setting FSE services configuration file: [ OK ]
Setting FSE trace configuration file: [ OK ]
Setting FSE startup services: [ OK ]
NOTE: after successful installation write correct name of FSE Server