Command Reference Guide

2.14 NAME 96
events in the HSM file system filter. The flags and the corresponding events
are the following:
– 0x00000001 .... main HSM file system filter execution flow.
– 0x00000002 .... HSM file system filter’s hooking to system functions.
– 0x00000004 .... virtual file system (VFS) method calls.
– 0x00000008 .... low level communication between user applications
and HSM file system filter.
– 0x00000010 .... HSM file system events.
– 0x00000020 .... read/write/change operations on file HSM attributes.
– 0x00000040 .... locking.
This argument may only be used together with the SysDbgFlags argument.
If it is not used, HSM file system filter event logging is not enabled.
• – –disable–dbg
Disable debugging of FSE processes. Usage of this option overrides current
debugging settings in FSE tracing configuration file (see section FILES),
but its effect is limited to the period of time until FSE processes are stopped
with the fse command (current FSE session). After the processes are
restarted, the settings in FSE tracing configuration file apply.
Note:
Usage of this option has no effect on debugging of the currently running
Back End Agents. However, it has an effect on debugging of the Back
End Agents which will be started later in current FSE session.
• –h, – –help
Print the usage information for this FSE command.
• –v, – –version
Print the copyright and version information for this FSE command.
File System Extender 3.2 Command Line Reference