User's Manual

hp StorageWorks File System Extender User Guide 83
Example of an LTO media pool configuration file
Example of a disk media pool configuration file
[FSE Pool]
[Version = 1]
[Date = "2005/04/10 16:11:26"]
[User = "[e-mail]"]
#
# Specify the name of the media pool. Media pools are
# used by FSE partitions.
#
# NOTE: You have to assign media to pools with fsemedium command.
#
Name = "My_LTO_Pool"
MediaFamily = LTO
# Regular - regular media pool for FSE partition
# Backup - media pool for backup media
PoolType = Regular
#
# Change the values of the on-tape format if the defaults don't suit
you.
#
# NOTE: Some of the parameters will be used only if the tapes are
# (re)formatted.
#
[DefaultFormat]
BlockSize = 32KB #min=4KB max=1536KB
# Single volume only supported on LTO. Therefore, no system volume is
# created on the LTO tape.
NumOfVolumes = 1
SysVolLocation = None
SizeOfSysVol = 0MB
[FSE Pool]
[Version = 1]
[Date = "2005/04/10 17:30:00"]
[User = "[e-mail]"]