User guide

Operator Commands
76 HP StorageWorks ESL9000 Series Tape Library User Guide
Configuring the Library
The Configure Library command lets you assign the following:
■ Library model number
■ Number of storage bins
■ Number of drives
■ Library SCSI ID
■ Tape drive SCSI ID
■ PTM configuration
Note: The serial number and IEEE ID fields are set automatically through the library
firmware.
To configure any of these attributes:
1. In the Operator screen, press the Configure Library button. The control
panel displays the Configure: Library screen (see Figure 30).
Figure 30: Configure: library screen (ESL9595 shown)