CLI Reference Guide

show.security.switchBinding
207CLI Reference Guide for Directors and Edge Switches
Syntax
switchBinding
Purpose
This command displays the switch binding configuration.
Parameters
This command has no parameters.
Command Example
Root> show security switchBinding
Output
The switch binding configuration data is displayed as a table that includes the
following properties:
Output Example
The output from the show.security.switchBinding command displays
as follows:
Switch Binding State: Enabled and Restricting E Ports
00:11:22:33:44:55:66:77
88:99:AA:BB:CC:DD:EE:FF
11:55:35:45:24:78:98:FA
show.security.switchBinding
Switch Binding State The switch binding state, which can
have the following values:
Disabled, Enabled and
Restricting F_Ports,
Enabled and Restricting
E_Ports, or
Enabled and Restricting
All Ports
Switch Membership List The active Switch Membership List.