Manualshelf

CLI Reference Guide

ManualsBrandsHP ManualsDo-It-Yourself toolsStorageWorks Director 2/64 base 32 port config
121122123124125126127128129130
CLI Commands
122 CLI Reference Guide for Directors and Edge Switches
Syntax
deleteZone “zoneName”
Purpose
This command deletes a zone from the zone set in the work area.
Description
Changes are not activated on the switch until the
config.zoning.activeZoneSet command is issued.
Parameters
This command has one parameter:
Command Example
Root> config zoning deleteZone TheLeastUltimateZone
config.zoning.deleteZone
zoneName Specifies the name of the zone to be deleted.