Command Reference Guide

Chapter 1: Matrix Server Commands 51

sandiskinfo --dynvol_properties

Dynamic Volume: psv1 Size: 2439M Stripe=Unstriped

Subdevice: 20:00:00:04:cf:13:38:18::0/5 Size: 490M psd1p5

Subdevice: 20:00:00:04:cf:13:38:18::0/2 Size: 1950M psd1p2

Dynamic Volume: psv2 Size: 490M Stripe=32K/optimal

Subdevice: 20:00:00:04:cf:13:38:18::0/7 Size: 490M psd1p7

Dynamic Volume: psv3 Size: 490M Stripe=8K/optimal

Subdevice: 20:00:00:04:cf:13:38:18::0/10 Size: 490M psd1p10

setquota – set quotas

Synopsis/

/opt/polyserve/sbin/setquota

Description

This command is based on the Linux setquota command but has been

modified to work with PSFS filesystems as well as the standard Linux

filesystem types. The command is provided on the Matrix Server quota tools

RPM. There are no changes to the syntax or operation of the command. See

the Linux setquota man page for details about using the command.

snapctl – manage snapshot operations

Synopsis

/opt/polyserve/sbin/snapctl

Description

This command is used internally by Matrix Server and should not be run

directly.

spctl – dump the SanPulse trace buffer

Synopsis

/opt/polyserve/tools/spctl -l

Description

This command should be run only at the request of PolyServe personnel.