Command Reference Guide

Chapter 1: Matrix Server Commands 49
Copyright © 1999-2006 PolyServe, Inc. All rights reserved.
Following are some examples of these options.
Show Partition Information
The -a option also lists the partitions on each disk. When combined with -u, it
displays partition information for unimported disks.
# sandiskinfo -a
Disk: /dev/psd/psd5
Uid: 20:00:00:04:cf:13:32:d1::0 SAN info: switch fcswitch port 7
Vendor: SEAGATE ST336704FC Capacity: 34732M
partition 01: size 3905M type Linux (83)
partition 02: size 813M type Linux (83) (PSFS Filesystem)
partition 03: size 7813M type Linux (83) (Membership Partition)
Show Local Device Information
The -l option displays the local device name for each disk, as well as the
default disk information. When combined with -u, it displays local device
names for unimported disks.
# sandiskinfo -al
Disk: /dev/psd/psd5
Uid: 20:00:00:04:cf:13:32:d1::0 SAN info: switch fcswitch port 7
Vendor: SEAGATE ST336704FC Capacity: 34732M
Local Device Path: /dev/sda
partition 01: size 3905M type Linux (83)
partition 02: size 813M type Linux (83) (PSFS Filesystem)
partition 03: size 7813M type Linux (83) (Membership Partition)
Show Filesystem Information
The -f option displays existing PSFS filesystems on imported disks.
# sandiskinfo -f
Volume: /dev/psv/psv1 Size: 2439M (PSFS Filesystem)
Stripesize=0K
Local Mount Point=/mnt
Volume: /dev/psd/psd1p6 Size: 490M (PSFS Filesystem)
Disk=20:00:00:04:cf:13:38:18::0 partition=06 type=Linux (83)
Local Mount Point=(not mounted)
-U Display output in the format used by the Management
Console. This option is used internally by Matrix Server and
does not produce human-readable output.
-q Suppress output of all log messages.