Command Reference Guide

Chapter 1: Matrix Server Commands 34
Copyright © 1999-2006 PolyServe, Inc. All rights reserved.
PSANcfg – manage ports, community string
Synopsis
/opt/polyserve/sbin/PSANcfg [-hu] [-[lL] <Port WWN>] [switch ...]
Description
The PSANcfg command can be used to add or remove local HBA port
information in the Matrix Server configuration and to unfence ports on
FibreChannel switches.
The options are:
-l, -L
The -l command adds the specified HBA port to the list of local ports; -L
removes the specified port. The mxsanconf command invokes PSANcfg
with these options; they should not be run directly.
-u switch ...
Unfence all local ports on the specified FC switches.
-h
Print a usage message.
PSANinfo – show FC logins, Naming Database
Synopsis
/opt/polyserve/sbin/PSANinfo [-n] [[-s]|[-u]] <switchname>
Description
The PSANinfo command can be used to print the Naming Database or to get
a snapshot of logins for a particular FibreChannel switch.
The options are:
-n
Print the contents of the Naming Database.
-s
Wait <s> seconds between probes of the FC switch.
-u
Wait <u> microseconds between probes of the FC switch.