User's Manual

2. Pullthediskdrivepartwayoutoftheenclosure(Figure 34-3) and wait for the media to stop
spinning.
3. Removethediskdrivefromtheenclosure(Figure 34-3).
Figure 34 Removing a disk drive
Replacing a disk drive
To replace a disk drive:
1. Push the ej
ector button on the disk drive, and pull the release lever down to the full open position.
2. Alignthedrivewiththebay,andslidethedriveintotheenclosureasfarasitwillgo(Figure
35-1).
3. Close the
release lever until it engages the ejector button, and the disk drive plugs into the
backplane (Figure 35-2).
4. Press in firmly on the disk drive to ensure that it is seated properly.
5. Verify that the drive activity indicator remains on for at least 10 seconds.
Figure 35 Replacing a disk drive
62
Customer self repair