Specifications
Table Of Contents
- MSA1510i maintenance and service guide
- Contents
- About this guide
- 1 Illustrated parts list
- 2 Specifications
- 3 System components and LEDs
- 4 Available diagnostic tools
- 5 Customer replaceable components
- Procedural overview
- Customer self repair
- Recommended tools
- Warnings and precautions
- Determining whether a component is hot-pluggable
- Powering off and powering on the MSA
- Removing or installing a 2-Port Ethernet iSCSI blank
- Removing or installing a hard drive blank
- Replacing a hard drive
- Replacing the controller, controller cache, or controller battery
- Replacing a 2-Port Ethernet iSCSI module
- Replacing a fan module
- Replacing a SCSI I/O module
- Replacing a power supply module
- Replacing the MSA1510i chassis
- A Regulatory compliance and safety
- Index
2-Port Ethernet iSCSI module LEDs
The 2-Port Ethe
rnet iSCSI module has one LED to show the status of the module, and each port has two
LEDs to show status and activity information for the specificport.
Item Name
Condition Color
Meaning
Solid
Green
Power is on, the module is
operational, and communication
between the module and the
controller is established.
Blinkin
g
Amber
Power is on, but there is no
communication to the controller.
1
Module status
Off
—
Power is off, the module is faulty,
or the controller is faulty or not
present.
Solid
Green
Alinktothenetworkisestablished,
and the status is good.
2
Port status
Off
—
Thereisnolinktothenetwork.
Blinking
Green
Alinktothenetworkisestablished,
the status is good, and there is
activity on network.
3
Port activity
Off
—
There is no network activity.
newpage pi
1510i Modular Smart Array maintenance and service guide
25