Specifications
Table Of Contents
- MSA1510i maintenance and service guide
- Contents
- About this guide
- 1 Illustrated parts list
- 2 Specifications
- 3 System components and LEDs
- 4 Available diagnostic tools
- 5 Customer replaceable components
- Procedural overview
- Customer self repair
- Recommended tools
- Warnings and precautions
- Determining whether a component is hot-pluggable
- Powering off and powering on the MSA
- Removing or installing a 2-Port Ethernet iSCSI blank
- Removing or installing a hard drive blank
- Replacing a hard drive
- Replacing the controller, controller cache, or controller battery
- Replacing a 2-Port Ethernet iSCSI module
- Replacing a fan module
- Replacing a SCSI I/O module
- Replacing a power supply module
- Replacing the MSA1510i chassis
- A Regulatory compliance and safety
- Index
NOTE:
System power does not shut off completely with the power button. Standby removes power from most of
the electronics and the hard drives, but portions of the power supply and some internal circuitry remain
active. To remove the power completely, disconnect all power cords from the device. For instructions,
see “Powering off the MSA1510i”onpage38.
Controller LEDs
During normal runtime, the array controller has 18 LEDs that indicate controller activity or malfunction.
20
System components and LEDs