Owner's manual

Configuring the Product
44 Embedded Web Server User Guide
— Open Fabric 1.0 — Choose this option for managing heterogeneous
fabrics and if the product is fabric-attached to HP directors or
switches and open-fabric compliant switches produced by other
original equipment manufacturers (OEMs). This setting is the default.
4. Click Activate to save and activate the changes. The following message
displays: Your changes to the fabric parameters
configuration have been successfully activated.
5. Set the product online as follows:
a. Choose Operations from the navigation panel. The Operations page
opens.
b. Click the Online State tab, then click Set Online. The following message
displays: Your operations changes have been
successfully activated.