User guide

Monitoring and managing the switch54
• Threshold alert—If a threshold alert exists for the port, an alert indicator (yellow triangle) is
displayed by the Threshold Alert field, and the configured name for the last alert received is
displayed in the field.
• Zoning enforcement—For switches, this field displays N/A.
Displaying switch information
Double-click the switch illustration (near to, but not on, a hardware component) to display the Switch
Properties dialog box, as shown in Figure 12.
Figure 12 Switch Properties dialog box (Edge Switch 2/32)
The following information is displayed in this dialog box:
• Name—Switch name.
• Description—Switch description.
• Location—Switch location.
• Contact—Personnel to contact.
Incompatible zoning
configurations
Refer to the HP StorageWorks HA-Fabric SAN high
availability planning guide for information on fabrics and
on joining zoned fabrics.
Build fabric protocol error.
No principal switch (no switch
in fabric is capable of being
the principal switch).
No response from an attached
switch.
Table 4 Messages in the Port Properties dialog box Reason field (continued)
Message Description