User guide

Edge Switch Element Manager user guide 53
0x0C ESA Security Mismatch Processing of Exchange Security Attribute Frame detected
required security feature mismatch.
0x0D Fabric Binding Mismatch Fabric Binding is enabled and detected a switch
connection with an incompatible fabric membership list.
Could also be the result of problems delivering EFMD ILS.
0x0E Authorization Failure
Reject
The switch on the other side of the ISL detected a security
violation. This switch receives notification via a generic
reject reason code and sets its port to the invalid
attachment state in sympathy.
0x0F Unauthorized Switch
Binding WWN
A Switch Binding error was detected on either an E_Port
or an F_Port.
0x10 Authentication Failure ISL Authentication Check (CHAP) failed—If you wish to
allow the connection, update the authentication lists or
disable authentication.
0x11 Fabric Mode Mismatch A connection was not allowed because:
An HP M-Series switch or director attempted to connect to
an HP switch or director running in Open Fabric mode.
An HP M-Series switch or director running in Open Fabric
mode attempted to connect to another vendor’s switch or
director with an incorrect ELP revision level.
0x12 CNT WAN Extension Mode
Mismatch
The ELP maximum frame sizes were incompatible because
one product running in CNT WAN extension mode
attempted to connect to another product running in a
normal mode.
Segmented E_Port messages
Incompatible operating
parameters, such as resource
allocation time-out values
(R_A_TOV) or error-detect
time-out values (E_D_TOV) are
inconsistent
See ”Configuring operating parameters” on page 79 for
more information.
Duplicate domain IDs See ”Configuring operating parameters” on page 79 for
more information.
Table 4 Messages in the Port Properties dialog box Reason field (continued)
Message Description